News

Surgical Shadowless Lamp Manufacturer: Methods for Replacing Surgical Shadowless Bulbs and Precautions for Installing Shadowless Lamps
Surgical shadowless lamp manufacturer shares how to replace the surgical shadowless lamp bulb?
How to replace the light bulb of the surgical shadowless lamp if it needs to be replaced after a long period of use? As a manufacturer of surgical shadowless lamps, let me teach you how to replace the bulbs of surgical shadowless lamps!
The total reflection series surgical shadowless lamp products emit light through halogen surgical shadowless lamp bulbs, and the total reflection mirror reflects the light source to the surgical site for surgical illumination, thereby better observing small, low contrast objects at different depths inside the incision and body cavity. Due to the possibility of interference from the surgeon’s head, hands, and instruments, the design of shadowless lamps should eliminate shadows as much as possible and reduce color distortion to a lower level.
In addition, shadowless lamps must be able to work continuously for a long time without emitting excessive heat, as overheating can make the operator uncomfortable and dry the tissue in the surgical area. shadowless lamps are generally composed of a single or multiple lamp heads, fixed on a cantilever that can move vertically or cyclically. The cantilever is usually connected to a fixed connector and can rotate around it.

For shadowless lamps installed on the ceiling, one or more transformers should be installed in the remote control box on the ceiling or wall to convert the input power voltage into the low voltage required by most light bulbs. Most shadowless lamps have dimming controllers, and some products can also adjust the light field range to reduce the light around the surgical site (reflections and flashes from bed sheets, gauze, or instruments can make the eyes uncomfortable).
After a period of use, the entire reflective surgical light bulb may be damaged or lost, and it is necessary to replace the bulb. During the process of replacing the surgical shadowless light bulb, there are several points to pay attention to. Cut off the power and effectively avoid damage to the shadowless light product by electricians. When disassembling the surgical torch bracket, remember the position. Some shadowless light manufacturers do not impose restrictions. If the position is installed incorrectly, the bulb will not light up or the shadowless light will be damaged.
Surgical Shadowless Lamp Manufacturer: Precautions for Installing Surgical Shadowless Lamps
In hospital operating rooms, surgical shadowless lights are one of the indispensable equipment. Through shadowless lighting, medical staff can view without shadows, which brings convenience. However, some details need to be paid attention to during installation. Next, the manufacturer of surgical shadowless lights will briefly explain.

1. As the surgical shadowless lamp control box is placed inside the wall, the heat generated by its transformer cannot be dissipated, which can easily cause the transformer, brightness control board, and transformer output line to burn out. If there are several holes in the control box, using compressed cotton to block the holes is beneficial for heat dissipation and can effectively filter dust.
2. The back cover of the surgical shadowless lamp cap is relatively heavy and can be easily rotated when suspended in the air, but it is inconvenient to disassemble. In order to save time for surgery, if the back cover of the shadowless lamp body adopts a button type structure, it can be easily opened and closed, which is conducive to troubleshooting in emergency situations.
3. The back cover of the surgical shadowless lamp body is not tightly sealed, and the heat generated by the bulb cannot be dissipated, resulting in multiple wire burns inside the shadowless lamp body back cover. A few holes are drilled in the control box to block the compressed cotton, which reduces the phenomenon of circuit burning in the modified shadowless lamp body back cover.