Surgical shadowless lamps are used to illuminate the surgical site, in order to best observe small, low contrast objects at different depths in the wound and body control.
1. The lamp head of the lighting fixture should be at least 2 meters tall.
2. All infrastructure fixed on the ceiling should be placed reasonably to ensure that they do not interfere with each other in terms of functionality. The upper part of the ceiling should be sturdy and secure enough to facilitate the rotation and movement of the lamp head.
3. The lamp head of the lighting fixture should be easy to replace in a timely manner, easy to clean, and maintain a clean state.
4. The lighting fixtures should be equipped with heat-resistant devices to reduce the interference of radiant heat on surgical tissues. The surface temperature of the metal object touched by the lighting lamp cannot reach 60 ℃, the surface temperature of the non-metal object touched cannot reach 70 ℃, and the maximum upper limit temperature of the metal handle is 55 ℃.
5. The control switches for different lighting fixtures should be configured separately to be controlled according to usage needs.
In addition, the working time of the lighting fixtures and the accumulation of dust on the surface of the lighting fixtures and walls may hinder the illumination intensity of the lighting fixtures. It should be taken seriously and adjusted and disposed of immediately.
LED surgical shadowless light is a good helper during surgery, which can provide shadowless illumination and enable staff to accurately distinguish muscle tissue, which is beneficial for operational accuracy and fully meets the requirements of shadowless light in terms of illumination and color rendering index. Below is an introduction to the maintenance work of LED surgical shadowless lights:
1. The LED surgical shadowless lamp is composed of multiple lamp heads, so it is necessary to check whether the bulbs are normal in daily life. If there is a curved shadow in the work area, it indicates that the light bulb is in an abnormal working state and should be replaced in a timely manner.
2. Clean the casing of the LED surgical shadowless lamp after work every day, using weak alkaline solvents such as soapy water, and avoiding the use of alcohol and corrosive solutions for cleaning.
3. Regularly check whether the handle of the shadowless lamp is in normal condition. If you hear a clicking sound during installation, it indicates that the installation is in place, so that it can move flexibly and prepare for braking.
4. Every year, LED shadowless lamps need to undergo a major inspection, usually carried out by engineers, including checking the verticality of the suspension tube and the balance of the suspension system, whether the screws at the connections of each part are tightened properly, whether the brakes are normal when each joint is in motion, as well as the rotation limit, heat dissipation effect, status of the lamp socket bulb, light intensity, spot diameter, etc.
LED surgical shadowless lamps have gradually replaced halogen lamps, and have the advantages of long lifespan, environmental friendliness, and low energy consumption, meeting the current requirements for green lighting. If you also need this product, please contact our customer service for a quote and purchase.
Post time: Nov-11-2024