News

1. Body adjustment of nursing bed: hold the head position control handle tightly, release the self-locking of the air spring, extend its piston rod, and drive the head position bed surface to rise slowly. When rising to the desired angle, release the handle and the bed surface will be locked in this position; Similarly, grip the handle and apply downward force to lower it; The lifting and lowering of the thigh position bed surface is controlled by the thigh position handle; The rise and fall of the foot bed surface are controlled by the foot control handle. When gripping the handle, the pull pin separates from the positioning hole, and the foot position bed surface is locked in this position by its own weight. When the handle is released to the desired angle, the foot position of the bed surface is locked in that position; Coordinating the use of control handles and joystick handles can enable patients to achieve various postures from supine to semi supine, bending their legs, sitting flat, and standing upright. In addition, if the patient wants to lie on his side when lying on his back, first pull out the small bed head on one side, put down the guardrail on one side, press the control button on the outside of the bed surface with one hand, release the self-locking of the side air spring, extend the piston rod, and drive the side bed surface to rise slowly. When the desired angle is reached, release the control button to lock the bed surface in that position and complete the lateral position from the face. Note: Use the same operation instead.
2. Use of nursing bed defecator: Rotate the defecation handle clockwise, the lid of the defecation hole will automatically open, and the toilet will automatically be delivered to the patient’s buttocks in a horizontal direction for defecation or cleaning of the lower part. Turn the defecation handle counterclockwise, the lid of the defecation hole will close and be flush with the bed surface. The bedpan will automatically be sent to the operator’s side for the nurse to take it away for cleaning. The cleaned bedpan will be placed back on the bedpan rack for future use.
3. Use the nursing bed guardrail to support the top edge of the side guardrail horizontally, lift it vertically by about 20 mm, rotate it 180 degrees downwards, and then lower the guardrail. Lift and flip the guardrail 180 degrees, then press vertically to complete the lifting of the side guardrail. Note: The use of foot guards is the same.
4. Use of infusion stand: The infusion stand can be used regardless of the bed surface being in any state. When using an infusion stand, first twist the two sections of the infusion stand into one section, then align the lower hook of the infusion stand with the upper horizontal pipe, and align the upper hook head with the circular hole of the upper pipe on the side guardrail. Press down to use. Lift up the infusion stand and remove it.
5. Use of brakes: When stepping on the brakes with your feet or hands, it means braking, and when lifting it, it means releasing.
6. Use of nursing bed seat belts: When patients use the bed or need to change their posture, wear a seat belt (the tightness of the seat belt should be adjusted according to personal circumstances) to prevent danger.
7. Operation of the foot washing device for the nursing bed: When the foot position bed surface is horizontal, adjust the thigh position handle and lift the thigh position bed surface to prevent the patient from slipping; Grasp the foot position control handle, place the foot position bed surface in a suitable position, rotate the foot position movable plate downward, shake the thigh position handle, keep the foot position movable plate horizontal, and place it on the water basin to wash feet. When washing feet, remove the sink and move the feet to their original position. Grasp the foot control handle and raise the foot bed surface to a horizontal position.